collar won’t budge

I didn’t either until I asked that is what is cool about TAG help is just a keyboard away LOL!!

If you are talking about the collar that the air bottle screws into there are two screws in it you have to remove the trigger group plate to get to it I don’t take mine apart from the rear of the gun I take the everything out toward the front of the frameFirst thing you want to remove it the small allen head “Plastic” bolt takes a 3/32 allen wrench don’t use a ball end allen wrench the heads of these will strip out very easy once you have that out, remove front forearm one flat head screw take out 4 set screws two on the same side as the power wheel 2 on the bottom of the frame take them all the way out the bottom ones are longer than the ones on the side barrel will now slide out the front of the gun just watch how things come out and repeat when putting it back in. what will come out is the barrel power wheel assembly there is a rubber washer on the back barrel bushing easy to miss when re assembly comes in place don’t know what you have, if it is a talon or ss the hammer and breech assembly will come out if it is a Condor same thing just have an extra hammer weight, to get the hammer and the breech out you have to pull the trigger and push in on the safety at the same time while pointing you gun down might have to give it a couple jerks or downward thrust what I do makes it easier for me with the air bottle off take a dowel rod and just push it out from the back and push it out the front of the frame while pulling the trigger and pushing in on the safety they will both come right out! I didn’t mention this but your cocking knob will have to be unscrewed from the breech to get it out this sounds like allot to do but it really isin’t once you do it a couple times it will get easier every time you do it all this is also in the Quick Ref if I have confused you it is all in there just do a search and some post on this subject will come up.