Condor .22 breech end barrel diameter.
Hello.
What is the turned down diameter of a Condor .22 caliber barrel turned down to (breech end of course)?
When I built my .038, I went with .5″ dia. but never was able to measure the original barrel diameter.
Help.
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
Justforfun I have a stock 24″ barrel out of my Condor, I don’t have a mic it is in my shop, but with digital calipers it is .308 if you need a better measurment let me know but I am guessing that is really close I double check my measurments with my calipers after using a mic and I am usually right on, hope this helps! length of turned down area looks to be 2 and 9/16 of an inch long if you need that 😯
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Eddie thanks, exactly what I needed.