CONDOR 9MM
Hello everyone, my name is Ed. and i`m the happy owner of 2 condors .22, i just found this forum and is full of good info, so i tink this is the best plase to ask for info.
what i want is to make a factory condor convertion to 9mm and i would like to know what do i need for this task and where can i find it.
I read about people making this convertions buth i don´t remember where
thx. for your time .
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
AK I think I’m just like you, started with a 22, tried to pm Sean but no luck unless you lathe yourself it will take a long time to get all the parts. I could not wait so I bought the 25 lw barrel with special bushings, big hammer, modded valve and shroud from Tony@TT. Great guy with excellent service. He was right once you go to 25 you will never go back!!! It is awesome 42 gr EunJins at 1000 fps and accurate. This is for hunting. For long range accuracy I shoot the 27 gr BenjSher domed pellets at 1090 fps on setting 5.
Good luck making the condor9mm. Pls pm me if you find parts builder.
You can pm Blodnob( Sean)
Stick around , there are guys on here who can do what you want.
hey dvu0704, thx for your repply, reading what you say my biggest problem would be the big bore valve, heavier spring and hammer = no problem, bigger breach = not so ease .
do Sean have a webpage ? or how can i contact him .
any other input are wellcome .
It’s much better if you just buy 1 already converted and sell your .22 to someone else who needed it.
If you still want to convert your factory .22 Condor to 9MM, you will need to get following parts below from someone here in this TAG.
9MM barrel from LW
Big bore valve from Sean or someone who can make it.
Heavy hammer/spring
Custom 9MM breech to fit
To keep the noise down, you will need a new big/fat/long shroud also.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
I ordered 2 set of big bore valve from Sean last year, I am using 1 of them right now, will considering sell the second set if you want it. Give me a PM.