condor BROKEN?will not cock
😥 For some reason my condor will not engage the hammer when i try cocking it. I took the trigger guard off and cleaned debri dust ext. ,but it still will not engage when pushed forward. should i take all modded parts off and send to airforce to fix or do you guys have any suggestions 😯 please help ps. first order of jerrys slugs are on the way and now my gun breaks 👿
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
Michael,
Glad to help.
Roachcreek
You have saved the day thank-you so much
thx RC ill give it a try will update ya back apart she comes
AFC,
One of the problems that I had had like you is when using a heavier spring I have trouble getting it to cock.
Unless your trigger sear is set up this way already:
If you look at the three springs that work your trigger and sear, check the spring on the sear, that peice comes up to grap the hammer, it is the spring closer to your muzzle. There is a little round hole for the spring, but a 1/2 inch towards the muzzle is a elongated slot that the sear works in, put your spring in the slot, against the slot wall towards the butt. THat will give you extra power to engage the sear.
Another cause can be if you have disengaged the safety and left the safety block in, if you have and the blick is still in, remove it by driving out the two pins closest to the muzzle to remove it.
I hope all this works for you, and remember you void your warrantee by screwing with mods and removing safethies and such, which of course most of us have, it means the repairs if ever needed come from your own pocket, but then most of just work on our own guns anyway.
Regards,
Roachcreek
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
roachcreek has done just about every mod, adjustment, and repair possible to these guns. if he got advice, TAKE IT…