Condor Bullpup
Does anyone make a bullpup kit for these bad boys?
Has one ever been seen?
All Replies
Not a kit or for sale but pretty cool
http://talonairgun.com/forum/viewtopic.php?t=1235&highlight=
It would all depend on how much youwant a bull pup.
Now just moving the tank would require a hanger and a elbow and a feed line.
Then you could plug the ETAC with a stock point and put a folder or something far more comfortable on it.
RC
That sounds like way too much work and money for negligible gains.
Actually the tank would be easy to move.
If you have a Etac or one of Tony’s angled adapters, you simply unscrew the nipple, screw in a elbow that attaches to a line running to a tank under the barrel that has a fill nipple on it.
Then have a plug manufactured to fill the hole where the AF tank screws into the ETAC.
The valve would remain where it is at and the ETAC would act as a prechambeer for pressure.
Now if you had a 4500 PSI tank and a 4500/3000 PSI regulator hanging under that barrel, you would get a bunch more shots.
A Timney trigger could probably be altered to do away with the crazy AF trigger system and moved right under where the sear is now and a linkage buit for it.
A WOK guard could be altered to set further forward and the linkage to the Timney trigger manufacutred.
So you need an ETAC, an elbow, a tank hanger, to hold the tank to the forearm and a plug for the end of the ETAC.
You have to figure out a shield to protect your face from the breech in case of a ruptured breech.
I have some diagrams in Photofucket but it is down right now.
Regards,
Roachcreek
Has one ever been seen?
With the air tank being aft of the bolt I doubt it would be possible to make a bulpup kit. It would probably be so much work you’d be better off buying a evanix max, or edgun instead of cobbling someting together on a condor.
- You must be logged in to reply to this topic.
So all this prechamber business has already been sorted out?
Aka, I won’t be losing FPE?
Also, do you guys know where to find those slender and long airtanks that some of the nicer airguns use? The 62ci JDS airman I have is just too chunky to mount forward and the slimmer JDS tanks dont go up to 3000psi…