condor conversion question
i have a Talon SS with an 18 inch barrel. am considering a conversion to a condor tank/ valve. what else will i need? heavier hammer( and if so what weight)?, different hammer spring? ALL ADVICE APPRECIATED
All Replies
Dollarhunt,
If your wanting Condor performance and using a Condor valve, you need the Condor hammer weight, which is just a bushing that sets next to the hammer to put the total hammer weight up to 85 grains I think it is.
The hammers and hammer spring are the same as the SS or Talon, so just the weight is the difference and that is needed to open the Condor valve.
You will gain substanial performance with just the longer barrel by itself or at least I did with the 24 inch barrel.
Roachcreek
- You must be logged in to reply to this topic.
I think it’s 69 or 70 grams with the condor weight? Do a search $ there should be a right nice amount of posts talking about it. I recommend you get a custom one piece hammer even if it’s the same weight as stock. Ditto on the barrel. Good luck!