Condor on C02
this is fun if you just want to shoot some paper in the basement or wherever Co2 is the way to go. no need to keep filling up the tank i will post a 10 shot string in the next half hour using a 12″ .22 barrel with 14.4gn CPHP all are weighed at 14.4gn
All Replies
[quote=”PANDEMIC”]Ive only shot c02 at ten yards but they group just fine I wonder if the Condor powerplant has something to do with that[/quote]
Could be. The mrod with 20″ barrel was spot on. The TSS grouped about 1.25 inches at 20 yards.
Ive only shot c02 at ten yards but they group just fine I wonder if the Condor powerplant has something to do with that
me…but my whole powerplant is custom.(even in the adapter…
good old maw has, do a search on him, or just maybe he’ll chime in
Has anyone here tried Co2 on a AF .25 ❓
How’s your accuracy on Co2, 12″ barrel. Got my ass kicked by an Mrod playing airgun golf on Co2. Shots wander all over. Switched to HPA and consistantly drilling the center of bottle caps and breaking wooden matches at 20 yards. Seems Co2 is just too slow for my TSS.
NtD
if youre capable, polish and port or otherwise mod the valve, you can get a bit more velocity to stabilize.
bigger bores and longer barrels make surprisingly good use of a warm shot of co2…look at the QB brigand…
Hey PANDEMIC,
How’s your accuracy on Co2, 12″ barrel. Got my ass kicked by an Mrod playing airgun golf on Co2. Shots wander all over. Switched to HPA and consistantly drilling the center of bottle caps and breaking wooden matches at 20 yards. Seems Co2 is just too slow for my TSS.
NtD
Non regulated, 1500psi down to about 1100psi depending on target range. Shooting 10.2gn Kodiak Match at 680fps down to about 550fps or there about.
Great for indoor 10 yards and outdoor 20-25 yards.
For 40-50 yards I can pressure to 1700-1800 psi and get some decent accuracy.
I don’t have baffles inside my frame – it is bone stock.
Hey sss,
Are you using a 1500psi regulator? What fill psi? What’s the fps?
Cheers
Hey sss,
Are you using a 1500psi regulator? What fill psi? What’s the fps?
Cheers
i only use the co2 when shooting in the basement an plastic army men lol
Pandemic – I’ll try greasing the power wheel. But the real problem is cocking the gun. Way harder at PW 12 than PW 2.
Sadly- physics. One of the reasons I like shooting HPA at 1500psi is I use pw 0 and the trigger is light and smooth. The cross hairs say on target during the shot cycle.
Grease the o-rings the the dvd that came with the gun said it will also help a lot I don’t think AirForce puts enough grease on there guns just give it a light coat not to much. Make sure its silicon grease/lube not petroleum grease
GH – Didn’t count, but think I got about 350+ shots on a 12 oz Co2 tank.
Pandemic – I’ll try greasing the power wheel. But the real problem is cocking the gun. Way harder at PW 12 than PW 2.
- You must be logged in to reply to this topic.
I will have to go shooting at 20 yards to see what happens lol