condor shot like 10fp energy
some help here guys i got a condor that is shooting very slow at full pwr on the wheel makes at least 10 fp energy everything seems ok just the amount o air coming out of the valve seems to be the problem, also after i fill the tank and open the bleed valve i got the impression that a lot of air goes out, any help would be appreciated,
All Replies
on the frame everything seems ok, when i bleed any other rifle seems like a really quick bleed, with this tank bleeds air for like 3 seconds and at this time this is the only AF thank i have, can’t compare to another one.
No problem Vic..Thanks for taking them off my hands….Everything in the frame is working ok? the hammer, breech sliding smooth? Do you have another tank that you can fill and compare the amount of air that bleeds off when you fill it to see if you are loosing all of the air out of the 10fpe tank? You should also be able to tell how much is in the tank by watching the gauge needle when you are filling…It will move quickly until it reaches the same psi as what is in the tank….Seems the only way to loose air from the tank is if the valve is leaking..Sounds like the valve is not opening fully….
i try to fill the tank to 2700 but after i bleed the line i have no idea how much air remains in the tank, by the way i just got the barrels, thank you jeff
How much are your filling the tank to…? What is the psi in the tank before you start to fill?
- You must be logged in to reply to this topic.
I just can’t understand how it would loose air without leaking through
the valve….Try filling the tank, bleeding the line, then fill the tank
again to see if it takes more air than it should to top off again….The
only other answer is to empty the tank and check the valve…