Condor SS .25 for slugs
My Condor doesn’t see much light these days. So I thought maybe I should make it a slug gun with Nielsen 44gr slugs.
Well, I bought a bag of HP slugs from Nick but since I don’t know nothing from nothin’ they won’t fit in the leade. Nick revealed that I need to have the have the leade cut in.
So two questions:
1. Can anyone recommend a good air gun machinist ….Dayotat?
2. If I cut in the leade, will I not be able to go back to pellets?
Thanks for the help.
KP/NC
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.
Yes you can still use pellets after you cut the leade in for bullets, they will just seat a little deeper.
There are quite a few good smiths on here. I live and work in Canada. so really don’t take any cross-border work just because of the duties and shipping fees! How I go about cutting in the lead is with a die grinder mounted in my metal lathe and turning the barrel at slow speed and using a small tapered stone.