Condor SS 25cal with a 24inch 22cal barrel?
My Condor ss is stock with 18 inch 25cal barrel. I have a 24 inch 22cal barrel. I understand if I can use the 24inch barrel it will stick out frame a little and won’t be suppressed. Can I use the airforce 24 inch barrel in 22cal in my Condor ss frame?
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
I tried all kinds of things and decided to stop wasting time with trying to get a gun that was too powerful for .22 to work. Can’t tell you how many hours trying to find a decent “bell” with a chrony. So, instead of trying to downsize the power, I sent it to Dyotat for an experimental conversion. Now, it’s a regulated .25 (about 100 shots/fill using kings) and converts to a slug gun. The slugs are n the 65-72 grain range and the most accurate groupings are within 10 shots; after that, the slugs wander a bit.
I’ve been wanting to do a post on it and give the details. Lotsa mods and lotsa power!
Do you have an “O” ring under the Top Hat ? The “O” ring will bring your air flow down and make the gun quieter because of less hammer bounce, from there you make adjustments to get the gun where you want to.
wll2506
Thanks for the replies. I tried it and it is loud lol. Now to save money for a shroud. By the time I’m done I’m going to have a collection of barrels :whistle:
I had trouble getting my Condor’s power down enough for a .22, 24″ barrel. It’s kinda overpowered for .22, without a reg.
Yes it will work.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Suppressor from air guns of Texas will fit ss with 24 barrel. Makes ss with 18 barrel super quite and hammer noise only sound. With 24 barrel it is about same as ss stock.