Crazy tall scope mounts
Anyone have any recommendations? I’m using a 68/4500 paintball tank with an ETaC and I have the standard “high” mounts but I still can’t get a clear view into the scope.
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Are you using a TriRail? That would add a 1/2″ or so…
You could always run a couple TriRails! 😉
Yeah my scope is 2.75″ c to c. Thats the problem with 4500 psi tanks, they are short and fat.
anti cant levels? I’ll have to look into them
Hopin’ to stick with 4500psi
Do you have a tri- rail mounted? They add a little more hight.
The higher you go, the more critical the cant is.
My scope is 3.5″ c/c of barrel and I use 2 anti-cant levels and it has improved my accuracy tremendously.
You need to get a 53 ci or 62 ci 3000 psi tank. You can get a gurrila 62 ci tank for $39.99 from ANS Gear. I use med 40 minute rings and no tri rail. They are the lowest I could get from Mac1 that have droop machined in. I have no problems with scope. I wish I could get it lower but I would have to cut off and lower scope mount.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I have cut and extended a set of scope mounts for a guy that wanted TALL mounts .. it wasn’t fun but it is doable..
Greg