Cricked Air Rifle Bullpup "Multishot"
Does anyone know anything about this new bullpup air rifle? It’s look similar to EDgun, but not EDGun and it’s multishot but not semi-auto.
Does anyone owned 1 of these? it’s seem to be the same size as Lelya. Here is some pictures downloaded from Russia’s webside. BTW, This bullpup also made in Russia.
The guy in the white t-shirt look like Ed. Ed, is that you?
Few close-up picture of Cricket # 5.
All Replies
Thanks for the link, it still look kinda funny too me, but this the first and the best conversion I have seen. I was hoping if the owner could take come close-up pictures to see how the job was done, I have seen other conversion, look really Mickey Mouse when look closer.
👿
here is one 😀
I have been checking out the FX Royale 400. With the stock bottle, it would make a ugly bullpup but, the air tube and shroud off of a Whisper will fit on the Royale. The regulated shots would drop to about 40. I could live with that.
I am intrigued by the new smooth twist barrels that FX has come out with.
Looks like an exciting year for air gun design.
I have become addicted to this “BB Gun” shit!
I know, the wait is killing and everyone wanted it now, LOL. We ‘re all hope it come sooner 😆 😆 😆
Speaking of convert the FX Royale into the Bullpup will look ugly, just because the big/short bottle in the way, I did not see anyone make any bullpup out of those type of gun that have big/short bottle in front.
If you could wait until MAY, I hope the new barrel that Ed mentioned a while back will be available also, you can get them all at once 😆 😆 😆
For other existing Matador owner, if you want the multishot or repeater that coming, you better started to save up some money now, by the time it ready, you can get 1 for your gun, it’s not going to be cheap and nobody know the price just yet. So started to save now 😆 😆 😆
Myself, I am ready for it, I knew this coming but did not know it take longer than I expected it 👿
I want an Edgun Long Version Matador multi shot with the new LW barrel. Looks like it could be a couple of months off.
I want one REALLY bad!
I need a new “BB Gun” now. The FX Royale 400 is looking good right now. I wonder if I could make a bullpup out of it.
If I get one, I would try to convert it.
I might have to get the FX and see what Ed and Tony have available in May.
I have become addicted to this “BB Gun” shit!
http://www.youtube.com/watch?v=9d0d6qgsvTw they need to watch this movie. they could learn a lesson from yuri urlov
People like you just make Americans look stupid and ignorant. Some of us are, like you just displayed, but I would say we have a pretty good group here as a whole. I’m embarrassed for you! 😳
I’d love to have a multishot kit for my Matador!
Seems like in order to retrofit single shot guns, you would need to replace the part of the action that the bolt sits in (not sure what that part is called). So it’s probably a little more difficult than a bolt-on, but it sure would be a great upgrade.
Base on what Ed said before, it’s will be an add-on, so I would assumed it does both.
It is being made now but I cannot tell the data when I will be able to show it. Most likely the end of March, anyhow we need some time to test it before offering to sell. But as soon as I have prototype I make the short technical review and shoot some video to show.
Ed, will it be a bolt on to make a single shot Matador a multi-shot or a complete gun that is a multi-shot?
later
NO CUTTZZZEEEESSS 😆
Ed – put me down for a mulitshot when it’s done. Tony has my email. 😉
later
http://www.youtube.com/watch?v=9d0d6qgsvTw they need to watch this movie. they could learn a lesson from yuri urlov
The fact an American company isn’t making one is the Americans problem…. not Edgun’s.
To be making slur’s based on Russia’s (past) political system simply because you cannot get what you want is ridiculous.
They have the output they have…. and thats that…. Maybe to increase output a fraction to cater to… the “shitloads” in the bullpup lacking USA would cost them “shitloads” and not be worth the return on investment.
Even when they have enough, do you understand the logistics involved? It isnt like sending something from FL to CA – there are import issues, taxes and duties. I’m sure they (or you if you had a clue) dont want to be shipping one or two a week as each fraction of a shitload order comes in…. as its got to be much more cost effective and simpler to ship several units at a time – which means that order’s have to be taken and people will.. yes unfortunatly have to wait.
My advice would be to go buy an airgun from a capitalist US based tuner if you want to see what a wait is….
If the Cricket started to import to US, it will kill the EDgun market for sure, everyone wanted to have multishot, both gun look/feel the same, Cricket gun supported up to 325 bar base on what I saw on the gauge.
326 Bar = 4600 psi
Is that even possible? Is there a valve out there that would handle such pressure? It would be a bitch to fill.
I’ll bet it’s just a large gauge on a 3500 psi rifle.
Hoot
No problem filling Hoot. Can’t do it with hand pump.. Would have to be a
SCUBA, SCBA, or compressor 😀 The valve will not have 4,600psi on it
as it will be behind the regulator…. Might have 2,200psi or less..
I don’t know if it could handle that high pressure or not, I am waiting for you to get 1 and test it. 😆 😆 😆
- You must be logged in to reply to this topic.
I want one REALLY bad!
I need a new “BB Gun” now. The FX Royale 400 is looking good right now. I wonder if I could make a bullpup out of it.
If I get one, I would try to convert it.
I might have to get the FX and see what Ed and Tony have available in May.
I have become addicted to this “BB Gun” shit!
A bullpup bottle gun would be interesting for sure goat…. Keep me
updated on that one….