cricket .35 power adjuster ????
Hi guys. Is there a power aguster available for this model. Thanx
All Replies
Viewing 12 replies - 1 through 12 (of 12 total)
Hi ernest. So the picture you put on with the 3 springs and the screw in plug. What would be the best for the .35 cal. And the 82grain pellets. As i want to purchase wat you recommend. Thanx. Can you pm me with your PayPal details. Thanx
That’s my stock 9mm spring on the right and that’s not for sale, if you want to max out your reg at 2100psi use the longer stronger ones.
if you want the longer ones I can give you the part #
mine was 1800psi stock. currently set at 1400psi to max out at 900fps 44g .30 cal
your limiting factor in getting higher FPE is the hammer spring, isn’t strong enough to fully open 1925psi the higher the reg pressure harder for the HS to open the VS–you need that large volume of air. with the longer stronger spring it will fully open the VS longer.
The reg can operate around 2150psi after that the rotor isn’t long enough to seat and cut out the supply end.
was to much fpe for me with the 9mm over 130fpe, kinda lights out with the scope–cant see the pellet fight anymore with the barrel flip, kinda like shooting a HP springer.
mind you the valve stem is the same size as all the cricket caliber, working with higher reg pressure will damage the VS—it maybe metal on the outside but same old delrine inside and that’s were it break.
So the picture with the adjuster and 3 springs. Are they still suitable for the .35 cal ??
My was at 1740psi and can get 115fpe, at 1812psi can get 119fpe and it is max from the factory.
So what are the regs set at straight from the factory ??
I do not understand, stock spring give me 115fpe…
Sorry didn’t indicate that’s for a .30 cal
if you have stock 9mm barrel its up in the +133fpe with 81g with reg set at 2000PSI
I prefer the flat shooting .30 at 100fpe and can shoot slugs faster then the 9mm
I do not understand, stock spring give me 115fpe…
1 HSTA and one stainless spring in the middle that’s all you need you get higher fpe then stock. $35 ship, post on the yellow when I have time. stock spring cant fully open VS over 125b with this one tested to 2100psi, tested only on the .30 TJ barrel 44g at over 1000-1010fps
Are these parts available to buy ernest. Do you sell them and post them ??? Thanx
Yes longer one to use extra power mod.
Viewing 12 replies - 1 through 12 (of 12 total)
- You must be logged in to reply to this topic.
The hsta plug which is 2 threads longer. Can it still be used on the .35 ? Is it better than the standard factory on ? Thanx