Cricket avoid to POI problem
I found on Russian Kalibrgun forum maybe useful guide how to avoid change POI in cricket.
original:
Ничего сложного. Сначала просто покрутить восьмерки, чтобы понять как и что куда тянет.
"Задуй в резик 180, затяни переднюю восьмерку (не до дури) и немного заднюю восьмерку, резик и ствол должны входить в коробку без зацепов, и сжимания ствол резик. " topshot
Потом сдувай потихоньку до 125, контролируя посадку коробки. Потом задуй до 240-250. Посадка должна быть такой же легкой. Если цепляет, то винтами задней восьмерки подрегулируй. Опять потихоньку спускай воздух и контролируй посадку. В общем, дольше писать...translated by google:
Nothing complicated. First, simply twist the Group of Eight, to understand what and how much pull.
“Blow in airtube to 180bar, tighten the front eight (not to make a fool) and a little back eight, airtube and barrel should be included in the box with no hooks, and squeezing the barrel.”
Then deflate slowly to 125bar by controlling the landing of the box. Then Blow in to 240-250bar. Planting should be as easy. If the catches, then adjust the screws back eight. Again slowly deflates and Control the landing. In general, longer write …
It´s slightly different than Ernest´s guide but may be is it ok…
All Replies
Viewing 15 replies - 1 through 15 (of 15 total)
original:
Ничего сложного. Сначала просто покрутить восьмерки, чтобы понять как и что куда тянет.
"Задуй в резик 180, затяни переднюю восьмерку (не до дури) и немного заднюю восьмерку, резик и ствол должны входить в коробку без зацепов, и сжимания ствол резик. " topshot
Потом сдувай потихоньку до 125, контролируя посадку коробки. Потом задуй до 240-250. Посадка должна быть такой же легкой. Если цепляет, то винтами задней восьмерки подрегулируй. Опять потихоньку спускай воздух и контролируй посадку. В общем, дольше писать...translated by google:
Nothing complicated. First, simply twist the Group of Eight, to understand what and how much pull.
“Blow in airtube to 180bar, tighten the front eight (not to make a fool) and a little back eight, airtube and barrel should be included in the box with no hooks, and squeezing the barrel.”
Then deflate slowly to 125bar by controlling the landing of the box. Then Blow in to 240-250bar. Planting should be as easy. If the catches, then adjust the screws back eight. Again slowly deflates and Control the landing. In general, longer write …
It´s slightly different than Ernest´s guide but may be is it ok…
did they check the front screw to make sure the rim adjusters are in place? If not go back three clicks and make sure the third adjuster is in place
Make sure they back off the second bar adjuster before adjusting the power level . 100% of the high power will be adjustable on the third screw
4500 psi is not what you want with the third screw, The second screw is the power screw and needs to be released real slow . Never release fast as the flex composer is going to be exposed to the air in the tank.
Your fucking nuts
Mike
~ Greg
Free float the air tube??? What does that even mean?
What kind of Cricket do you have ?
~ Greg
~ Greg
Free float the air tube??? What does that even mean?
I like color tone of wood now.
:biggrinn: I drill out though 3 hole to lighten the foregrip and overall weight of the Bullpup stock that I modified.
As Wingman suggested ……..
http://talonairgun.com/forum/viewtopic.php?f=33&t=32021&hilit=hack
~ Greg
Comfy is for those weak at heart 🙂
yes it could be used as mag holder but i think quite uncomfortable 😆
~ Greg
And those recesses can double as mag holders too. :ugeekn:
I did it all on my one cricket too. 
😀
I have free floated air tube.
I free floated the AT on all my Crickets, it works to help prevent any POI shifting no need to loosen the stock screw now.
~ Greg
Here is the link http://forum.kalibrgun.ru/index.php/topic,3991.600.html
there goes my reading skills out the window, Did anyone understand that?
Mike
Could you posting a direct link to the forum please? Or PM it to me? Thanks
Another high-five for those pathetic Colibri’s… 😀 😀 😀
Viewing 15 replies - 1 through 15 (of 15 total)
- You must be logged in to reply to this topic.
:rofl: :rofl: :rofl:
~ Greg