Cricket bleed valve screw
anyone know where I order the nylon tipped screw for the bleed valve. The factory screw is leaking. Thanks
All Replies
Viewing 12 replies - 1 through 12 (of 12 total)
huuuum I’m to old and can’t remember but maybe so, if you’re in the USA PM me your address I’ll send you some for free no charge Sir ………
~ Greg
hey what’s the deal with McMaster shipping charges. Wanting to buy some screw but they dont tell you how much the shipping cost is. Is this normal?
Also IMPU´s combination does work well for degasing. It works like HST too but it has shorter spring guide!! I dislike it.
Greg I have Ernest degassing tool and yes it does work great!
Yellowyak – it is very simple you will need just very very small circle piece of bicycle tube under the ball. Then use brass M4 screw.
Octavius….I will give that a try. Thanks
When you do not have access to 
you should use also ordinary brass flat screw M4 and made some small washer from bicycle tube and insert it below those small ball.
I have had use it and leak anymore 😀
Great…thank you
Opps …. crap ….. sorry Yellow wrong hyperlink.
http://www.mcmaster.com/#94095a112/=rhebuo
Also remove the little ball bearing if you use this you don’t need it but save it just in case.
If you’re looking for a quick and dirty fix some also used a piece/section of O-ring with the ball bearing and used Blue Loctite and let it dry overnight before filling.
Just an added friendly info is that on both of my Crickets I never opened the AT bleed out.
I have a degasser that came with my Imppu v3 HST.
http://en.shop.dase.fi/product/47/
http://talonairgun.com/forum/viewtopic.php?f=33&t=27911&p=353315&hilit=Luppa+HST#p353315
Or you can just get a Cricket HSTA degasser tool from good O Ernest.
http://sniperlabyo-precision-airguns.com/accessories
~ Greg
Thanks Greg…do you know what size I should be looking for?
Viewing 12 replies - 1 through 12 (of 12 total)
- You must be logged in to reply to this topic.
Greg, thank you.