Cricket receiver disassembly and assembly videos…
Hello, I am a new member here but I have been doing a ton of reading on this site since I got my .22 Cricket a month or two ago. I bought it as a .22 standard and have since changed the barrel to the longer .25 barrel and added my own shroud for an overall length of 34″. It is shooting JSB Kings at 950 fps and is extremely accurate and quiet. I also have a regulated .22 FX Royale 400 that is an amazing shooter. I’ve really enjoyed all the information on this site and especially the videos from Ernest that have been nice to watch. When I did the .25 Cricket barrel swap I had to replace my bolt. I figured I would contribute a little to the site and make a couple of videos on how I disassembled and reassembled the receiver to change the bolt.
All Replies
Thanks…I think the .22 barrel is around 18″ and the .25 barrel is 24″. Mine was shooting 895 fps with 18.1 JSB’s and with no other changes than the longer .25 barrel it is shooting 950 fps with 25.4 JSB’s.
As far as I know longer .22 barrels aren’t available for the Cricket.
Nice video. Thanks for sharing.
Your rifle is looking good and tough. how long is the .25 barrel? is same length as .22? I’m wondering if 20″ or 24″ .22 barrel is avail?
- You must be logged in to reply to this topic.
CNCricket did you relube inside mechanism of cricket with oil or some grease? I´m asking due to when I strip my HW100 and all degreased with break cleaner and then I applied Wurt Multi oil. I have good experience whit it. HW100 have more stable consistency (warm-cold)
