Crosman 2250XT
what do you think off the Crosman 2250XT.and see if any of you guys have won
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
No. And there is no way to tell if you have a good barrel until you shoot it. Most barrels are ~ $20 from crosman. Once you have a good barrel it will shoot as well as most others to the limits of the gun. Mac-1 and some others will cut you custom barrels.
Chocked??!
Like this??……..
one more question about them are barrels chocked on the factory ones
I have 2. Both modded with 24″ barrels and B&A high flow valves and the B&A adapter to use a 9oz co2 tank (along with the required trimming of the stock). One in .177 and one in .22. Why – I dunno. I’ll probably sell one once I perfect the other. Just need heavier springs in both before deciding. The .22 is amazing for what I have invested. The .177 is getting closer but still isn’t the 20-30y paintball & army man plinker I was after.
AND – they were just as much fun in stock form, I just tend to tinker when I get bored.
Actually – if you are interested in the mods I mentioned, PM me.
Good gun.
Go for it.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
I have one with aluminum breech, long probe and LDC… It is quite
impressive up to 45yds….Most accurate with JSB 16.0gr shooting them about
500FPS and gets 150 shots or so on one cylinder. Needs trigger work out of
the box (polish and spring tension)… I also Polished the bore and crown with
fine valve grinding paste….