Q:

De-power mods?

What mods are there to decrease power / increase shot count for the Condor? I know about the custom top hat at TalonTunes and read something about using an O-ring. Any other mods or links to more information?

Airforce Rifles/Pistols

All Replies

Viewing 11 replies - 1 through 11 (of 11 total)

whats the idea behind co2? we dont have that here so i cant really experiment with that

I can make your CSS shoot at almost any power level you want be easily
Changing out inserts.,……http://talonairgun.com/forum/viewtopic.php?f=3&t=32186

anyone know if the micrometer tank output is more or less than TT small insert?

Ok, thanks. I understand now. I just can’t get over how flexible this gun is. I’m getting ready to buy one and it seems it can be modified / converted to do just about anything. Awesome. 🙂

The micro-meter tank has a reduced flow valve and it is mainly developed for 10m and low fps.
With the 24″ barrel, .22 14,3 gr I get around 500fps on my low power setting.

http://www.pyramydair.com/s/a/AirForce_Micro_Meter_Tank/920

Cheers
Chris

What’s a “micro-meter” tank?
What sort of fps are you getting?

I’m looking to get a .20 or .22 for 50 yard target shooting. Might try 100 yards if all works well.

Maybe this is not a mod, but I have a micro-meter tank and I get in the 200-300 shots.
I am not sure if that is what you are looking for, but I have been shooting with it for a couple of months now and only pumped a couple of times.
Usually I can shoot from 3000 down to 1500psi and get around 300 + change shots. 1500psi is where the drop is too noticeble to keep on going

this is with a 24″ barrel in .22 shooting 14.3gr Xman Prem
I keep the power to the lowest.

Cheers
Chris

quote mikey:

Buy Tony’s quick change top hat and use the smallest insert and shoot 14 – 16 grain JSB pellets and shot count will substantially increase.
I can get close to a hundred shots filling to 3000 psi and shooting down to around 2000 psi.

A hundred shots per fill with a .22? That’s pretty darn good. What fps are you getting? What PW setting do you use?

Buy Tony’s quick change top hat and use the smallest insert and shoot 14 – 16 grain JSB pellets and shot count will substantially increase.
I can get close to a hundred shots filling to 3000 psi and shooting down to around 2000 psi.

quote dougroundup:

Maybe try CO2?
You will also gain ultra long increase in shot count too.

That’s not a bad idea, except I’d need to buy an adapter. I found the thread on the oring mod and another on adjusting the top hat. I might try those first.

Maybe try CO2?
You will also gain ultra long increase in shot count too.

Viewing 11 replies - 1 through 11 (of 11 total)

  • You must be logged in to reply to this topic.