DID I SCREW UP ?
I have a 24 inch barell ordered from Tony for the SS….I also ordered an air tank which is sold as “extra air tank” for all talons.
Now ,could I of er should I of ordered the highflow valve for the Condor ? the idea was to build a pertnear but not quite Condor….will that tank work on the SS ? excuse me guys but this is my rookie year…. 😆
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
To use a Hi Flo Condor tank with the talon you need to use a condor Hammer or a extra hammer weight to get condor performance.
Using a Talon tank with a 24″ barrel will get higher velocities than using shorter barrel. The Hi Flo tank will use much more air and yield less shots per tank fill.
If you want a HI Flo tank just return Talon tank and swap for what you want?
Sam 😕
Thanks Sam ,looks like I did ok then…..I really just wanted to wake it up good plus use a 22 pellet…sounds like all is good.
Yes and NO?
To use a Hi Flo Condor tank with the talon you need to use a condor Hammer or a extra hammer weight to get condor performance.
Using a Talon tank with a 24″ barrel will get higher velocities than using shorter barrel. The Hi Flo tank will use much more air and yield less shots per tank fill.
If you want a HI Flo tank just return Talon tank and swap for what you want?
Sam 😕
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
That is a good set up. You are fine.