All Replies
Viewing 12 replies - 1 through 12 (of 12 total)
That is totally cool…
He sort of messed up with the shotgun stock though. He should have put it in so that the bottom edge goes through last so the seam is not on top where the pattern meets.
The kits are $100
What ever happen to Brad and his big dipping business?
where can we buy the kits?? i might be willing to give it a go on my bullpup build… 🙄 it cant cost more than annodizing
I guess if you started out with switch plates you could get accustomed to the process
SAW
Question,
If you fuck it up the first try, is there a way to undo it?
I bet I would mess that up in a heart-beat 😳 😳 😳 😳 😳 😳 😳 😳 😳
SAW
I really don’t believe it is hard watched several looks like gun stocks you would be better off with more material than not enough and making sure you angle the stock and do it slow, if you think about what you are doing transfering the camo to your project and just let it wrap around your stock! it does look like it does a neat job, it has been around for a while just never seen a DIY kit and with a cover coat of clear should be pretty durable I would think as good as any paint 😯 sooooooooooooooooooo who will be first we will see 😯
look easy and cool 😆
I am thinking to camo my Leyla, cause I have spare stock to mess around with 😆
Who is going to be the first to do an Edgun stock? That would be way cool!
Isn’t that cool I have read and seen a few things on the Hydrographing but never seen a DIY kit now my brain is thinking 😯
Cartman says it best.
Viewing 12 replies - 1 through 12 (of 12 total)
- You must be logged in to reply to this topic.
i did some more looking on ebay and found that you can get the sheets of print for $50 (1 section = 15’L X 35.5″W) and the whole kits are only $90..
http://cgi.ebay.com/Hydrographics-Water-Transfer-Dip-Kit-Do-Yourself-/220619332525?pt=LH_DefaultDomain_0&hash=item335defdbad
im still thinking that this is a viable option for my current build… 😈