All Replies
No rest for the wicked as my mother used to say :-/
Time for some more DIY…
Today it the lathe’s turn (pun intended) to work and it resulted in a degas tool al á B&O style.
Dr. 👿
Attachments:
This is what I was thinking about…
ID of spring is bigger than the treads and I’m not sure if the flange on the nylon guide stand up to the spring tension at full power..?
Therefore I left the clips in place and the 0.7mm extra headroom for the spring doesn’t do any for the .22 anyway maybe different on the .25
👿
Don’t be stupid. Of course you can use the brass screw for adjustment without the clip. Think ! Done thinking? Still don’t get it??
The hole inside the guide does’t have to go all the way thru but to meaaure just in right so you can still use it as an adjuster. That shortish piece you have there now doesn’t accomplish anything ( just ask your girlfriend) the plain screw itself won’t .
Those pieces are exactly like the guides i already have. Back to the drawing board Mr. Know -it- All…
Seriously – you loose some adjustment at the lower echelon of the scale but does that really matter since no one , except UK & German guys, need to go that far down anyways.
Sent from my iPhone using Tapatalk 2. This POS iPhone sucks though …
Why? If you take away the e-clip then you take away the adjusting capabilities of the brass adjuster. Are your “needs” met with only being able to adjust with the outer one and using the brass thread as a spring guide? Okay but do U know how difficult it is to make a hose in the lathe? Mc D’s drinking straws might work or if you find some aquarium type PVC type hose 😉
👿
Sent from my SM-N9005 using Tapatalk
One thing – loose the lock ring from the brass adjuster so the Delrin part (the guide inside the spring) can be made approx 20mm long and it´ll be perfect. And while at it make one for Papa too. Now – back to the Lathe and stay there untill my guide is done. :2:
Sent from my SM-N9005 using Tapatalk
Cricket only. Edgun has a different construction and there’s no need for a special tool.
👿
👿
My Dear Doctor Evil…..
A “Flash Supressor” for an air gun??? Have you taken leave of your Swedish wits?
Is Fredrick behind this?….some evil FX trick?
Dear ol Uncle 😛
I know you don’t remember but that’s not your fault…
I’ve switched from diesel to bio ethanol and the smoke is gone but the flash is not ergo a “flash Supressor” 💡
👿
👿
My Dear Doctor Evil…..
A “Flash Supressor” for an air gun??? Have you taken leave of your Swedish wits?
Is Fredrick behind this?….some evil FX trick?
It´s Doc´s idea of a nutcracker/bong combo. He calls it “The Blooming Onion” ..
DK that is some really nice work. It is for a Cricket gauge only or does it work for an Edgun as well?
Nice big pellet trap! But when looking at the surroundings it’s probably not, rather a shooting patio…
(Btw with Cr V steel and a hobby lathe with HSS tools it takes some time but I’m not in a hurry)
👿
I like your work
this is what I made once
as you can see, I am working on it hard
I’d like to try and make one.
- You must be logged in to reply to this topic.
Not really DIY but I ordered it my self 😉
9 liters 5,3kgs plus fittings
Dr. 👿
Attachments: