Does this exist?
A screw in for AF Talon that puts a pressure gauge between the bottle and the breech?
I guess I could use a straight Etac, but wondered if something not quite as long is available. I don’t remember seeing anything like that on the forum.
Regards,
H 😯 😯 T
All Replies
Okay here is another one i did to be able to use the Regulator & fill the tank, also added a pressure gauge. I have to the remove the older quick fill.
You can send me that tank for my HW100 i will make it fit 😆 😆
your white honky
lol, let me Hydro test it first 😀
Yup short Etac is the way to go 🙂
Naser
You can send me that tank for my HW100 i will make it fit 😆 😆
your white honky
Hoot,
It looks like you just need a short canted ETAC to me, unless removing the tank from the gun is a must.
I don’t have a gauge on mine anymore, it was a trade off, the gauge was not even close, and without it I could alter my frame enough to unscrew the bottle. I just plugged the hole with a 1/8 inch NPI plug.
Prior to that, I loosened two set screws I put in the inside of the frame to hold the bottle collar, and removed the collar and bottle at the same time. I found that far handier than removing the grip and trigger assembly to remove the collar, it also allowed me to time the ETAC to the frame better.
Regards,
Roachcreek
just intrested to know.
If you get me some i will make you one out of it for free
Baz, we too dont have them in Dubai but i buy them from http://www.onlinemetals.com/ i also just made a Theoben Tank made from titanium grade 12 & 7075 fittings, its 490cc.
some pictures, havent Hydroed yet.
just intrested to know.
If you get me some i will make you one out of it for free
Hmmm.
I think asking the guy that fabs the etacs would be a good idea.
Why use steel & add to the weight when aluminuim 7075 is much lighter & very strong !?
just intrested to know.
I heard you were good looking, but I didn’t know you were talented as well!
I’m going to see if I can find a gauge and perhaps get back to you with the thread type.
Hoot 😯
Yes Hoot I did make it myself. I sent it to a guy to try, and the next thing I new, he was selling his gun with it still attached, so I never got paid for it and never got any feed-back from him. If I was o make thiese in the future I would use hex steel bar, the same stuff Blodnob and Baznob valves are made from, which is Bright drawn mild steel [ BDMS ] which I would black using the hot chemical blacking process, which I use on mine and Blodnobs valves.
Hoot You need this i put this on the old forum six years ago
I’ll find one…..
Hoot
all the ones i build have a pressure gauge an a fill nip between the bottle an the gun . i hate not knowing what pressures in it an taking stuff apart to fill .
but im not sure ive see anything for a regular bottle , wouldnt be hard to make.
- You must be logged in to reply to this topic.
I didn’t know Jim made a short Etac, but I know not to underestimate him. I’ll take a look.
Hoot 😯