Q:

Edgun 2339

I posted this over at the Yellow. But, it will get buried in a day, so I’ll post this here, as well.

——————————————-

My Edgun adventure has not been without its bumps. Tony and I had a miscommunication, and he sent me a rifle with the wood stock. I don’t like this stock one bit (I’d prefer a grey one). Hopefully, he will correct that. The wood stock is clearly hand made, and lacks the polish of the standard stock. It has many sharp edges and a glossy finish with a tacky feel. No sir – I do not like it.

But, the gun….the gun I LIKE. It has a scratch on the air resevoir (Tony gave me $50 off), but that doesn’t bug me in the least. I have no intention of reselling this thing. And, I’ll touch it up with some black lipstick if I decide I want it to be pretty.

It came tuned to shoot JSB Jumbo 18’s at 920fps, and I have made no adjustments. I chronied 100 shots, starting at 200 bar. Here are the results (green, F1 Chrony):

920 923 917 916 914 924 926 929 927 929 (188 bar)
923 925 920 926 923 916 913 918 917 915 (175 bar)
926 921 913 925 927 918 924 923 922 928 (163 bar)
923 926 922 920 918 922 918 922 919 926 (150 bar)
918 921 923 921 921 922 917 924 924 922 (138 bar)
922 928 924 922 921 918 918 920 915 914 (127 bar)
914 920 921 922 914 913 911 920 911 913 (117 bar)
915 915 913 913 910 910 911 907 909 903 (106 bar)
911 907 910 905 900 903 899 899 896 892 (97 bar)
891 896 891 889 885 883 878 874 875 868 (87 bar)

I’ve seen some guys post Edgun shot strings with less variation. But, I’m quite happy with this, considering I’m getting 60-70 pretty darn consisent shots. The efficiency seems pretty remarkable. And realistically, if I’m out on a hunting trip, I can shoot this gun 100 times on a charge. Wow!

Accuracy…

I took it in the backyard to try a few shots at 20 yards. The groups were okay, but not great (likely because I was fighting off a swarm of mosquitos). So, I took it to the range to see what it can do when I’m not trying to protect my blood supply.

I tried JSB 18’s (normal, lubed with Napier, and lubed with Krytech). I also tried Kodiaks and Barracudas. They all had the same POI (nice to know, but unlubed JSB’s won out).

I was shooting off a wobbly plastic shooting rest (Predator). It worked pretty good for my Marauder, but doesn’t fit an Edgun worth a crap. So, I’ll be looking for an alternative bench setup. I was pretty shakey, and completely unable to “lock” the croshairs into position. And speaking of the Marauder, this would be a good time to mention the noise volume. They are about the same, but sound slightly different. The Edgun has a slightly lower tone.

Anyway, I started at the 20 yard indoor pistol range… The Predator rest did not fit on the narrow bench, so I was SUPER wobbly. It was aggrevating.

Still, these results were inspiring. So, I decided to get outside, and try it out at the 50 yard range…

So, did I pull that 5th shot? The Predator rest is fairly solid on the wider, range table. But, it still isn’t as good as a couple good sand bags. It doesn’t matter… because, now I’m too impatient to shoot any more 50 yard groups. Off to 100 yards…
Didn’t even bother to adjust the elevation knob – just used mildots (with a level).

From there, I lost patience with the paper punching, and promptly went to my Grandparent’s farm to slaughter starlings. As a challenge from my uncle, we set a gallon milk jug cap on end at 100 yards. Knocked it down on the first shot (bench rested).[/img]

EdGun

All Replies

Viewing 13 replies - 1 through 13 (of 13 total)

Oh, I didn’t even realize the slots were missing. Why not bust out a hole saw and put some nice round holes in that baby? Give it that machine gun look 😈 Would your Grandpa’s sling fit in a hole like that, or would there not be enough room for it? Anyway, good luck with resolving this issue.

quote rj-porter:

IMHO if i payed that much money for a gun i would hope it would be pristine

+1
I agree, that stock looks like crap. I am hope he will take care of you and swap it out.

Agree with you— 1550 is alot of money for any gun. I hope that things get resolved soon and you and Patman get the correct stock for your Edgun. Performance wise, it’s a keeper.

Mark

quote rj-porter:

IMHO if i payed that much money for a gun i would hope it would be pristine

While I am very happy Ed and Tony have made these available in the States, I also am inclined to agree with you. At $1550, there shouldn’t be any “surprises”. If Thoeben or Daystate did something like this, there would be fire and looting in the streets. 😆

And it’s clear that most who got the “wood” stock feel the same way. It was a business risk, and it did not work.

However, if the situation is corrected, I think that faith will be fully restored in the reputation of the Edgun name.

I’m still awaiting a response to this issue by Ed or Tony. The “cracked stock” issue has been addressed, but this one still remains unresolved.

IMHO if i payed that much money for a gun i would hope it would be pristine

quote Ted in Madison:

Good suggestions re: the stock, guys. I appreciate your input.

But, my main gripe is that I want those three slits in the front of the stock to I can use a shotgun sling without having to install studs. But, I do not possess the skills and tools to properly make those slits. I have a very nice sling (handed down from my grandfather) that I want to use.

If Tony opts to not swap out the stock for me, I will likely simply buy a normal one. I hear they are $100 and Tony can get them. Yes, that would seem pretty ridiculous (since I would then be spending $50 MORE for a gun with a scratched air reservoir), but it’s what I want for this gun. And at this point, I am “all in” on this thing. It has proven itself at the range.

I watched the DVD that Tony sent with the gun. It was of Ed and his workshop. There were normal grey stocks EVERYWHERE on the shelves. I kept thinking, “Just give me any one of those – you have dozens!!!!” 😀

I got the same wooden stock. I’m also expecting my grey stock replacement.

I see what you are saying.

I like the stock with the 2 slots better as well.

Good suggestions re: the stock, guys. I appreciate your input.

But, my main gripe is that I want those three slits in the front of the stock to I can use a shotgun sling without having to install studs. But, I do not possess the skills and tools to properly make those slits. I have a very nice sling (handed down from my grandfather) that I want to use.

If Tony opts to not swap out the stock for me, I will likely simply buy a normal one. I hear they are $100 and Tony can get them. Yes, that would seem pretty ridiculous (since I would then be spending $50 MORE for a gun with a scratched air reservoir), but it’s what I want for this gun. And at this point, I am “all in” on this thing. It has proven itself at the range.

I watched the DVD that Tony sent with the gun. It was of Ed and his workshop. There were normal grey stocks EVERYWHERE on the shelves. I kept thinking, “Just give me any one of those – you have dozens!!!!” 😀

Shot string looks good.The only way I could shoot mine was off a set of caldwell bags because the shooting rests just did not work with anything that short.

quote khadux:

Sorry Ted, I feel for you. Craftsmanship looks to be very low quality. You have to wonder on their decision to go with this stock on a $1500 gun in the first place. 😯

What is the black stock that comes with it? Is it not the very same stock only painted with bedliner? If that is the case, sand your rough edges down and get yourself a few cans and get to work. If you are uncertain of your skills…practice first on a few 2×4’s until you get the hang of not appying the paint “too thick” Thin multiple layers is the trick 😉

Sorry Ted, I feel for you. Craftsmanship looks to be very low quality. You have to wonder on their decision to go with this stock on a $1500 gun in the first place. 😯

I could fix that stock to any way I wanted it in 2 hours.

later

I replied on the YF but will do so here as well.

A LIGHT coat of sprayed on bedliner will make that gun look bad ass. A few light coats is the way to go.

Nice gun 😀

Viewing 13 replies - 1 through 13 (of 13 total)

  • You must be logged in to reply to this topic.