EDgun fill port dust cover
designed and produced small patch of following dust and dirt cover plugs. pics says it all.
if interested please contact via PM. price for one plug is 16$ including shipping.
cheers
Imppu
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
Thank you
i sended PM to you.
Kindly let me know how can i get two of them
Thank you
pics updated to better. there are still some of these left and ready to ship…
Material is POM-C otherwise known as Acetal Copolymer is an engineered plastic.
it is precisely engineered fit to EDgun fill port.
I was just thinking I may need to go get one of those plastic covers from Home Depot…
Then I realized I HAVE A LATHE NOW I CAN MAKE MY OWN!!!!!!!!!!!!! :whistle:
Nicely done part though! :8:
+1
I use a Hillman 5/16″ plastic hole cover. Snaps in and out easily. Two to a pack at Home Depot. Less than a dollar
What is it made out of?
I just put a foam earplug in. It works really well and is extremely cheap to replace.
I have been using a skinny bicycle tube cross sections as a port cover with great success. I cross cut them 1/4 inch at the top and 3/4 inch at the bottom and just slide them over the tube. They do the job, never fall of or get lost and the color is a close match. I walked into a local bike shop and the let me have my pick of their used tubes. You could make about 40 out of one tube. So I recon I have enough for he next 30 years. Wish I could claim credit for this idea but like almost everything else I have done to my R3s, I got the idea on this forum……
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.
Thanks Immpu!!!
High quality piece..
Gabe G