EdGun Matador Photo and Dimension Needed
I’m in need of a specific type of photo of the EdGun for a project i’m working on.
I need a rear elevation image of the back of the EdGun. As close to a perfect elevation as possible. I will also need the dimension of the airtube so I can scale the image into cad.
One similar to the one below but with a bit more of the stock at the butt plate showing.
I took the image from Zoco’s Cricket/Matador thread, I hope that’s ok Zoco… 😕 If not let me know and i’ll remove it promptly. 😉
All Replies
Viewing 13 replies - 1 through 13 (of 13 total)
Syn, – no problem…. 😀
Anybody may freely use my images as long as the source is being credited. That said commercial use is a different matter and is subject to different terms….. 😉
Glad you got the info you needed. I only saw your request this morning Oslo time….
Cheers…… 😀
sounds good. Ill see you there and you welcome to test fit
I should have something that is the same shape but not the real thing…
😉
yes Ill be there. If you want to take even more dimensions or pics you are more than welcome or if you want to test fit Im available.
You guys are the best!!! :8:
😆
Huge thanks!!!!
Demp, yes I am, are you going to make it to the fun day next Sunday?
heres a better image. Arent you in Nor Cal?
Im in north Sacramento area
first cutout from rear off stock forward is 2.66″
lower cutout is .688″ wide
😀
More good info!!!
I may have to make a couple! 😉
I wonder how many EdGuns are on this forum? 😯 😯 😯
I better get busy! 😈
airtube 1.4375″
breech .865″
stock 1.71″
Fuck! Imageshack now requires you to sign up to host a photo… I marked up what I needed but I can’t host it to post it…
Newbie, can I get one of the same resolution but from half way up the scope, down to about mid butt plate?
I’ll need a little info about the cutout under the air tube (at the bolt area) in the stock.
Airtube 1.4460 inch
Ok, i’ll up the ante.
First person to help me will receive one of what I am making to test out on their EdGun… 😉
Viewing 13 replies - 1 through 13 (of 13 total)
- You must be logged in to reply to this topic.
Syn,
Just to verify I’m not going to Diablo shoot next Sun I’ll be going to
Sac Valley Gun club bench rest shoot. It’s a lot closer for me and my friends.
Info here
http://www.network54.com/Forum/79537/thread/1342649428/Sacramento+Area+Benchrest+Match+-+Sunday+July+29th