Edgun matador screws sizes

1. Plug front and rear M5x8, strength class 12.9 – 6 pcs.
2. Clamps – M5x25, strength class 12.9 – 2 pcs.
3. Breech – M3x25, strength class 12.9 – 2 pcs.
4. Frame – M3x12, strength class 12.9 – 2 pcs.
5. Fixing handle shutter – M3x8 – 1 pc.
6. Mounting pads to trigger the plug and the rear cover e – M3x12 – 2 pcs.
7. Mount the back cover to the tank – M3x6, cone head – 2 pcs.
8. Lock urging mainspring – M3x8, cone head – 1 pc.
9. Attaching the cheek pads to trigger spacers – M3x6, cone head – 6 pcs.
10. Screws trigger rocker – cut and the ends are sealed from the M3x12 – 3 pcs.
11. Screw mounting brackets SC – M5h30 – 1 pc.
12. Tighten the screws on LH or Weaver cut and the ends are sealed from the M5x20 – 2 pcs.
13. Tighten the screws on “stars” in the moderator – M3h6, cone head – 3 pcs.
14. Attaching the cheek pads SC – M3h16 – 2 pcs.
15. Emphasis SC – M3x16 – 1 pc.

Moderator Edit: Be careful when sharing information here from other forums, TAG takes pride in sharing correct and safe information with its members.
The information you shared jeopardizes the safety of our members and other readers.
Any cap screws to be replaced on a PCPs air cylinder need to be grade 12,9. All other screws will benefit from being this harder grade also to cope with multiple strip downs.
Original TXT edited. Wingman