Edgun "break-in" groups – post cleaning.

I posted this over at the Yellow, as well. But, I know that half you boners don’t even step foot on that page. So…

My groups started to open up a bit with my Edgun. I know that I am capable of shooting MOA, 5-shot groups at 50 yards, so I got out a few patches and ran them through (sometimes this can do the trick). It felt like I was draging the patch through a brier patch. The dry patches were not enough to get the grime out. So, I ran a few “wet” patches through with Ultrabore gun cleaning solvent. I followed with a lot of dry patches, until the gunk was 95% gone.

As expected, when I started shooting again, things were out of whack. It took 40-50 shots for the gun to get back in line… but, it DID get back in line.

Here is how it all went down.