All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
15/16 socket on air guage, turn it off till you hear hiss, set it down and let it leak out.
I had to shoot it down .Should I put antiseize grease on the new valve?Would the spark plug stuff be alright?
if you have a cent or a dime and the pump fill adapter, put the coin flat in the adapter then put the adapter on the tank. The coin should be flat on the tophat inside the adapter.
slowly tighten the adapter until you hear air coming out. Slow is better. Leave it there for a while.
When it is empty, remove the adapter. If you can depress the tophat manually you are good to go.
cheers
Chris
mcc1961 , very slowly . You do not want to put any condensation in your tank at all . Number 1 big no , no . Can also mess-up your tank gauge .
FROM : THE BIRDMAN
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Don’t use any petroleum-oil based products in the tank or it will vaporize and detonate (dieseling)
If you need to lube use only silicon based divers products that are compatible with HPA.
There is not kidding here. You are going to damage the tank and get hurt
Cheers
Chris