Evanix ar6 hunter master pistol – help

I bought a used HM ar6 pistol and went to charge it from my bottle but air leaks out of the pellet cylinder area. Wonder what I am doing wrong ? I don’t have a manual for it, just the probe, two 6 shot sylinders, scope and gun.

thanks

Later

Other Guns

All Replies

Viewing 6 replies - 1 through 6 (of 6 total)

tachdriver

Participant

November 29, 2008 at 8:39 pm

Wonder if there is a trigger pull adjustment on these ?

later

dadwilson

Participant

November 29, 2008 at 1:50 am

Cool Dude and I am happy that you are up and shooting…..

tachdriver

Participant

November 29, 2008 at 1:43 am

Thank you DadWilson – that helped a LOT ! The magazine was in backwards. The flutes on the magazine point forwards, the gun came with it backwards. Be nice to see a breakdown of this gun also. Anyway I got it shotting right now so tomorrow I’ll sight it in. Great work, thanks

LAter

dadwilson

Participant

November 28, 2008 at 11:18 pm

I don’t know if this helps much, although I thought this would be a good start…I am sure there is more information on this and I will have to dig a little deeper.

http://www.pyramydair.com/site/manuals/ar6-hunting/

tachdriver

Participant

November 28, 2008 at 10:33 pm

Well airtight, that did it. I guess the hammer had enough pressure on the valve to hold it open. If anyone on the forum has a breakdown of this pistol, or a manual or anything pertaining to it’s fill and operation, I would deeply appreciate it if you can forward it on to me. My email is blueyes01@roadrunner.com

thanks

Later

Anonymous

Inactive

November 28, 2008 at 10:17 pm

Never had one, but it’s possible the spring preload alone is holding the valve open. Cock it then charge it?

Viewing 6 replies - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.