Finally figured out what was causing my TSS to be inaccurate
1. my GTBJ shroud may have been clipping. Before, I put in the shroud and rotated around until i didn’t see any “shadowing” and i tighten down the screw. That was WRONG! Because i later realized that when i tightened the screw, it would shift the shroud a little and it would shadow. Do I rotated it 180* where it would shadow, THEN tightened and the end result is that it’s clear when viewed through the breach.
2. FRAME FLEX. For fun I installed a laser… and the results surprised me because I could finally see the frame flex. If had too much pressure on the frame (via the bipod) and torqued it a little, the laser dot would laterally shift from the crosshairs… therefore indicating that the frame is flexing. Solution? Got rid off the bipod and now shooting with a bag instead.
Now it’s a one holer at 20yards. 🙂
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
Put a good one piece mont om your scoperail.
Give more frame stiffness.
Also you can put a steel U bar around the trigger eara, a bit work but it helps a lot.
Here a pic. of the Xtra bit of steel , anti flex 😈
Need some work but I hope to have the CHUNKY rifle ready for my holiday .
Wooden grips , xtra steelbar, onepiece mount, U.I.T. rail for handstop and Turner sling. ( .25 @ 45 fpe 😀 ).
Yeah AF makes them fly now 😆 😆 😆
Your frame flew? 😯 😆
Now that AF has its’ own machining center, can’t they beef up the loading (breach) area??? It’s way too damed delicate! There is nothing there to prevent flex at all.
I mean, we know wok won’t shut up about it, but who listens to him anyway? 😆 😀
You always wondered? A laser is a good idea for that?
ADHD at its best 🙄
Hey now, I don’t have oh look at the bird! 😆
I mean, we know wok won’t shut up about it, but who listens to him anyway? 😆 😀
You always wondered? A laser is a good idea for that?
ADHD at its best 🙄
That’s a good idea to use the laser for that. I always wondered if they really did flex.
I mean, we know wok won’t shut up about it, but who listens to him anyway? 😆 😀
The WOK GARD15 helps with the frame flew 😆
Glad you got it sorted!
I remember when people doubted the “frame flex” idea.
It is easy enough to remedy as long as you know it is a possibility. 😀
Its worth mentioning that the distance from bore to scope means a slight angle holding the gun will shift the POI left and right. Its like shooting a pistol from the hip rather than holding it at eye level.
It is a known fact Airforce frames will flex a bit!
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.
hey guys i recon the tri rail adaptor probably helps stiffen them up