Fixed my probe leak
Fixed the leak, My probe was not screwed in tight where it fits to the airline hose, I also put Teflon tape on it,
I filled accidently to 260 bar. Never have I got past 200 bar due to the leak.
I guess it will be alright on the side of my 22 cricket it says max, fill 300 bar?????
I found it by putting a couple of drops of dish washing soap around the probe as I was filling very slow..
Mike
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
You’ll be fine. I always fill my Cricket to 260bar because it then usually settles down to 240bar in the cold house after a little while. I’ll have to put some soap to my probe.. I think mine may be another issue though. Hopefully its something simple.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
I sure got a lot of shots with my 260 bar fill, Its still sitting at about 190 bar and there are 30 or more dead sparrows I had to pick up,,
Its a lot of work owning a Cricket 22
Earnest tuned my gun to 215 bar to 120 bar, I am sure its not good on the seals to go to 260 bar??? Just not sure, Maybe someone that knows more than I do will jump in here.
Mike