Glycerin filled guage recommendations…
I have a new Talondor, and I happen to take my spin loc tank into a shop to have filled (while I temporarily wait for a SCUBA tank to be certified) and this shop said my tank is off by as much as 500 PSI. I noticed this when I was filling this same tank by hand pump prior to selling the pump, but the shop confirmed it.
It is a new guage, and rather than sending back to Airforce for warranty, I thought I would just step up to a more accurate Glycerin filled gauge for my spin loc tank. Any recommendations as to who might have a easy to read glycerin tank gauge? Thank you in advance.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.

Good morning,
I replaced my Condor’s gauge,which was off over 400 psi, with the one below from McMaster.com. It is a class A rated gauge, accurate to +/-1% at midrange, and although it is larger than the original it has not been in the way. Easy to read, accurate and shiny, what more could you ask for! Just type the part number in McMasters search box and you’re off.
1 Each 3850K3
Stainless Steel-Case Liquid-Filled Gauge 1-1/2″ Dial, 1/8 Male Center Back Conn, 0-5000 PSI
$23.76
Phone (330) 995-5500 Fax (330) 995-9600 Internet http://www.mcmaster.com E-mail cle.sales@mcmaster.com
Happy shooting,
Budd0x