Q:

Got a report today.

So Mrs Reba Haley called me today to ask what gun i wanted built first the 308 457 or the 58 i went with the 457 first seeing as this is the first top of the line powerful big bore gun i will own its gonna be making 500+fpe and will be delivered in 3 weeks. once the 457 is done then the 58 and then the 308 im counting down the days

also i got in my casting stuff and have been making bullets out the ass in 457 i have 345 and 405grn in 308 i have 120 and 160grn and in the 58 i have the 500grn minnie ill get yall some pics up very soon

General Chat

All Replies

Viewing 11 replies - 1 through 11 (of 11 total)

Nice going on your Haley’s.Jack & Reba are super nice people to deal with.I know firsthand many more to come. PS.get a good compressor. Regards Rodney

sure did i hope it can keep up with all my shooting

RJ,

Shoebox, you must of bought the one off the tag.

Roachcreek

im gonna have a shoebox compressor here sometime next week no worries on air BTW i got plenty of tanks to fill too

Right on RJ! I hope that you have plenty of air. Those guns are sure going to use it up fast. 😀

its all in fun

A simple post turns ugly huha!

I am not asking about the “lube”! 😳

i have done the research on the bore and the bullets r sized correctly i talked to reba and got the bullet molds they recommended and im gonna shoot lubed and unlubed to see what is the best the barrels are also firearm barrels so they should be good

RC i dont eat the lead i melt it and funnel it into my ass

RJ,

It would seem that you are not making those bullet correctly, Making them out the ass would be painful and dangerous. 😯

Not to mention the effect that photo’s of those bullets coming out of your ass will have on the depraved minds here on the TAG. 😆

You put the lead in a melting pot and then melt it down and put it in the mold, you do not eat the lead. If you eat the lead, you will become a mentally challenged, lead paint eating, inter city youth.

Roachcreek

RJ have you done any research on the bore on these rifles , to size the bullets for them. and are you going to lube the bullets.

Viewing 11 replies - 1 through 11 (of 11 total)

  • You must be logged in to reply to this topic.