Q:

Graphic* Edgun .22 rabbit control

I had a phone call last week from a farmer who needed help with a rabbit problem.. he told me he had so many rabbits that that Id be there for a month.. unfortunately he had already educated them with his .22lr unsuppressed so they are a little on the cagey side.. How close can you get I asked.. He told me that there were so many burrows now that you’d be lucky to get within 100 meters of them without them ducking out of sight.. His wife breeds horses so noisy centre fires were out of the question so I headed on over to his place with the Edgun and he showed me the problem areas..
From a hill top I counted over 70 rabbits in one paddock!!! 😯 This guy was not kidding.. he indeed has a rabbit problem.. you can barely see grass for all the burrowing!
I made my way slowly to a nice crest which put a good number of rabbits within 90 to 160 meters and got to work.. there was a light variable wind from right to left which made it challenging as some times I was holding off for wind and it would suddenly drop causing a few frustrating close shaves.. but luckily the Edgun is quiet and most rabbits were only alerted to the fact they were under fire when the bunny beside it made a unmistakeable pop sound and somersaulted down the hill.. once I got dialled in it was head shot after head shot.. the furtherest clean kill head shot I ranged was 152m :8:
I even remembered to strap on the scope cam for you guys but have decided to return to this farm over the next few weeks until the numbers are back under control so a full length vid will come later.
I lost count of how many I shot but here’s a sneak peak of what’s to come..

Heres a couple of stars from the show.. the top Rabbit is the one in the vid taken at 96 meters and the lower one was taken at 152m

As it got dark I picked up just what I could carry back for the farmers dogs..

EdGun

All Replies

Viewing 14 replies - 1 through 14 (of 14 total)

quote ElmerFudd:

At 100 yds/meters, how many FPE is at impact using a .22? Same question at 150+?

100m retained energy would be 14.8 ft/lb

152m retained energy would be 9.91 ft/lb

This is working on a guess than Wingman is using JSB 18gn (heavy) in .22 and a muzzle velocity of around 920 fps

Chairgun is your friend, and it’s free !!

http://www.hawkeoptics.com/chairgun.html

Common belief is you require about 4.5 – 5 ft/lb to knock down bugs cleanly with correct shot placement

Enjoy !

The Cad

Great vid Wing! This Edguns are something else, 152m! Awesome,keep the good work bud!

At 100 yds/meters, how many FPE is at impact using a .22? Same question at 150+?

Phil. ..

You have a great record of long hunt shooting….

Good Job! I’d love to have that many rabbits around here… Keep up the good work.

Bunnies break-dancing to the Doors. :biggrinn: Great shooting!

I finally got around to editing a full length vid…
Theres not that many kill shots though as hitting the little critters at 100-160 meters is a challenge in the wind through the little scope cam LCD..
I was there to do a job so shot most of them off cam.. enjoy 😎

Wing man Where is the rest and full hunting videos???? i can’t wait to watch them,,,

152M!? head shot! Oh, you inhumane bunny killer, wing… you’re my hero.

You guys got rabbits as bad as we’ve got Asian stink bugs, yikes!

Just Beautiful….great shooting grounds

quote mywifeboughtit:

What scope are you using? From the vid it appeared to illuminate he necessary holdover mildot? Just curious.

Falcon Menace Counter sniper series 4.5-18 x 56.. I put the dot in the vid to show the holdover at 96 meters

What scope are you using? From the vid it appeared to illuminate he necessary holdover mildot? Just curious.

Wow! That’s a pretty extensive rabbit population & warren area.
Good luck on your cull.

Wing,

this is incredible long range hunting for a PCP,,,, very nice ,,, that place is made specially for hunting rabbits ,,, please post all pics and vids when you be free….

thanks for your enjoyable vid ,,i liked very much,,,

Viewing 14 replies - 1 through 14 (of 14 total)

  • You must be logged in to reply to this topic.