Hammer wear, power loss
My condor has about 1,000 shots through it or so and has been losing velocity. After reading several threads on the subject I decided to disassemble the gun to try and find the culprit of my power loss.
After removing the hammer I realized that there is wear on the bushing on the hammer. Could this be what some people consider the hammer ‘chatter’?
I have one of Tony’s 95g hammers w/ hammer slap mod on the way and want to make sure everything is operating properly as not to cause any wear on my new parts.
Any suggestions here?
[/img]
All Replies
Make sure it is smooth inside where the hammer travels. You can run some scotch brite inside the frame by wrapping a piece on a dowell and putting it in a drill motor. Both hammers uses same delrin pieces.
- You must be logged in to reply to this topic.
That doesn’t look like normal wear, it looks like it was dragged down a gravel road for 8 miles!
Something is seriously wrong there.