Q:

Hatsan bt65 valve measurments

I need to know some measurments of the hatsan valve
ID of and length of transfer port
length of the vale stem
if there is a diagram with measurments it will be better
Many thanx in advance

Mods/Machinists

All Replies

Viewing 9 replies - 1 through 9 (of 9 total)

OK —thank U

B = diameter of air passage behind seal.

Stem diameter is 0.200″ so if you meant the stem bore IIRC it is 0.205″

Im just doubt about B . ——–U said it is .269 about 7.5 mm —-may it be .196 ??? ie 4.5 mm ———because the valve stem head is about 6 mm

Many many many thanx Voltar

A= 1.455″
B=0.296″
C=0.705″
D=0.787″
E=0.278″
F=0.510″

this is the drawing

Still waiting.

Sorry for that mistake I mean the valve orifice or the part around the valve stem —– its diameter and its lenght
I will draw a diagram for that
really I need all the dimentions of the valve if i can get —lol

Thanx Voltar — many thanx

Post a pic or sketch of the dims you want.

Walter…

Viewing 9 replies - 1 through 9 (of 9 total)

  • You must be logged in to reply to this topic.