Visit Talon Tunes
Updated on July 6, 2010
mywifeboughtit
Participant
July 6, 2010 at 6:00 pm
Q:

HELP – Blodnob burst disk replacement

Does anyone know where I can get a replacement burst disk for a blobnob valve?

Or

Anyone have a busted blodnob valve I can buy to harvest the burst disk?

Or

Does anyone know of a suitable alternative?

Thx,
Ben

Mods/Machinists

All Replies

Viewing 7 replies - 1 through 7 (of 7 total)

voltar-1
Participant
July 8, 2010 at 12:28 am

All’s good, easy fix!

Walter….

mywifeboughtit
Participant
July 8, 2010 at 12:25 am

OK, have to call myself out here. Before assuming a burst disk has blown first check to see if the f’ing plug is screwed in tightly. Damnit.

voltar-1
Participant
July 7, 2010 at 1:09 pm

You do not want a 3k burst disk on a 3,000psi tank.

mywifeboughtit
Participant
July 7, 2010 at 12:59 pm

FYI for those with this issue in the future.

Talked to Brad and he said it is a std paintball 3k burst disk that has been removed from the hex bolt. I’ll give it a try and let the board know if it is really that easy.

mywifeboughtit
Participant
July 6, 2010 at 7:08 pm

Thanks!

voltar-1
Participant
July 6, 2010 at 6:56 pm

http://www.network54.com/Forum/79537/thread/1278381555/Anyone+know+where+to+get+a+burst+disk+for+an+airforce+Selph+Bloodnob+valve-++n-t

walkonking
Participant
July 6, 2010 at 6:08 pm

Best to contact Brad Selph and see what he used.

Check this out might help

http://www.ansgear.com/Paintball_Burst_Discs_s/538.htm

Viewing 7 replies - 1 through 7 (of 7 total)

  • You must be logged in to reply to this topic.