help
Good afternoon my friends, I need to help me because I bought a pressure regulator altaroz and now need to install on my talon cylinder ….. I wonder in what sense the valve, goes clockwise or counter-clockwise ….. it (valve) is very tight in the cylinder for me ta very hard to loose you guys have any tips to give me …….. I hope you can help me …… thank you all.
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
If you go above 300 it is bad for the tank. That why I say around 200. Yes make sure there is no air in it first.
yes left, or counter clock wise will loosen the valve. you do not want to get it too hot! but heating it quickly with a torch just at the collar/valve threads will not be a problem.
💡 1st off make sure the tank has zero air in it! 💡
then go slow on the heating, try 5 seconds first if that doesn’t do it, then heat a bit more… repeat this proses in till you can brake the threads free
dyotat100 thank my friend, let me get this straight I press turning right and turning left ……….. loose but warm up as you suggested there is no danger of damaging the cylinder ….. .. and he exploded in my face ……
Righty tighty lefty loosey. I heat it up a little right at the valve real quick. Nothing over a couple hundred degrees. They usually come off after that.
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
good night my friends, thank you guys for the help they gave me, I’ll do next, I boil water and when it reaches 100 degrees celcius I put the valve in hot water and then try to loose it, but all this already with the cylinder completely empty ……….. of course I do not want to hurt me …….. but thank you my friends.