Q:

Home Made Sling for Talon SS

Home Made Sling for Talon SS

Materials used.
Swivel Stud Set x 1
Bag Strap from an Old Bag of mine. x 1
Key Chain Rings x 2

 Just mount the Swivel and Studs
 Roll a Key Chain Ring into the gap of the swivel and stud.
 Its just fits perfect with enough play for moving freely.
 Finally you just have to Hook the Bag Strap to the Key Chain Rings !!!
The Advantage on the Bag strap is that its adjustable too so it gets the job done well. And we are good to Go !!!

Talon/Talon SS

All Replies

Viewing 11 replies - 1 through 11 (of 11 total)

I need one but shipping to india is too expensive…
So its not worth if I just have to purchase the “work butt”

wheres the work butt ?

oh ok it looked huge i was wondering what kind it was

Hey WOK I did like your post too….
I Don’t think I’ve missed reading any of your post …..
There r 2 things unique about you in the forum..Pics I could never imagine and 2nd would be lots of informative post….That’s why you the “Moderator”

Cdnhunter over to you…..
Below are the specs of the scope ….you might not hear much
about this scope in the forum… but its cheap, light,
and over all, does it job.

Beeman 4-12x40AO Scope, Illuminated Duplex Reticle, 1/4 MOA, 1″ Tube
Rifle scope
4-12x magnification
40mm objective lens (adjustable objective)
1″ tube
1/4 MOA (1/4″ click value @ 100 yds)
Duplex reticle (red illuminated)
6.6-2.4′ field of view @ 100 yds
109-76mm exit pupil
14.82 oz.
11.81″ long
Includes lens covers & 9.5-11mm dovetail rings
Not suitable for magnum spring-piston rifles

Cons : Scope is good at dawn and dusk ……(Brightness)The reflector on the objective is not good. Strain to the eyes if the sun is bright out there….

quote WalkonKing:

That is nice. Here is one I did.

http://talonairgun.com/forum/viewtopic.php?t=8

what kind of scope is that, wok?

That is nice. Here is one I did.

http://talonairgun.com/forum/viewtopic.php?t=8

nice job. looks like it does its job just fine…. 🙂

If you see the pic attached I have the studs attached at the 2nd and 3rd hole of the butt plate.
If you remove the 2nd one and have the rear part of the sling attach to the 3rd slot it comfortable.
I just left one of my extra stud on the shoulder butt plate so that I dont loose it.[2nd slot]

is it comfortable shouldering it with those swivels pushing up on you?

Thanks Peter I was wondering didn’t anyone like my Sling….!!!

ahhaha…nice sling

Viewing 11 replies - 1 through 11 (of 11 total)

  • You must be logged in to reply to this topic.