How do you Remove the Air Bottle Mounting Ring?

How do you Remove the Air Bottle Mounting Ring? I followed the directions below:
http://www.stealthresource.org/breech3.htm
but I can not get it out?
Feels like it is pressed in. My goal is to remove the breech slide.

General Chat

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

silents

Participant

September 20, 2009 at 1:13 am

r60us Look in the quick reference their is diagram that should help 😀 😀 😀

r60us

Participant

September 19, 2009 at 11:33 pm

quote SilentS:

r60us on the newer guns their are two allen screws holding the steel collar. The trigger guard and cover have to be removed to get to it. Be careful not to lose any springs from the trigger assembly.

I gave up for now… It was just too tight! The second screw on the newer guns would explain why…

Thanks everyone for the input.

silents

Participant

September 19, 2009 at 9:51 pm

r60us on the newer guns their are two allen screws holding the steel collar. The trigger guard and cover have to be removed to get to it. Be careful not to lose any springs from the trigger assembly.

r60us

Participant

September 19, 2009 at 4:06 pm

quote Langnasen:

It’s batter to remove the breech via the other end. Remove the barrel, take the knob out of the breech and push the breech past the sear and let it drop free.

Ok, I will give it a try.

Thank you

langnasen

Participant

September 19, 2009 at 3:53 pm

It’s batter to remove the breech via the other end. Remove the barrel, take the knob out of the breech and push the breech past the sear and let it drop free.

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.