How many of you have Uragan on here
I got into pesting again after a long time off. Still have my same guns and everything. My boys are growing up and got into airgunning again
So I end up testing some slugs in vulcan 25. 34 grain varmint knockers. Got it shooting very good However I am spending alot of time filling my tank. I hardly get 20 shots on a fill. Does anyone here shoot slugs with their Uragan.
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
If you’d like to buy my Huma Reg tester let me know
Zonk
I ended up putting a huma regulator in set to 148 that gave me 930 up from 920. I don’t know what the factory one is set at. I’d really like to know. The factory reg had creep and I figured just get some extra plenom space and get the huma. Factory regulator was very consistent after the 2 first shots. My goal was 935-940 but there is very little wrong with these groups. I haven’t checked the group yet with huma regulator yet. At this point the hammer is maxed out and I’d like to back it off and still be at 930 somewhere. See how it goes.
Very nice! Did you open up the reg a little or did you leave it where I set it at?
Zonk
Getting close to target accuracy
Varmint knockers 32.9 G at 920 with Uragan
<p style=”text-align: left;”>Pigeons absolutely do NOT take off anywhere after getting slugged either. They are absolutely devistating.</p>
Sparrow at 80 yards with slug
Varmint knockers work good on my gen one. Had to quit because I don’t have a big enough air tube for the 34 grain. Barks like crazy but not really a problem for me
100 yard 5 shot groups. If my regulator worked better they would be tighter.
Looking into slugs for 25 uragan currently
hopefully we will see replies
No I didn’t get any message
Eelect, did you get my replies about reg?
Zonk
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.
When I bought my Huma reg the site asked what Bar would you like it set at.
I had them set it at 135 Bar.
Zonk