how should air force rifles
ok guys how should the air force rifle come from ths factory ? so many ways to mod this line of airguns, with what options and why ? not trying to step on any toes here, but be the best u can be !! i see the catolog list a new bottle with gauge etc !
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
you forgot the tri-rail. not only does it stiffen up a weak area, cutting down on frame flex, it also provides a couple extra dovetails for mounting things.
I’ve had my Talon SS stock for 10 years, and I finally made the following upgrades to get it to the point where it is “the way it should be” :wink:. In addition to these mods, AF should switch from 11mm frame rails to numbered Picatinny/Weaver Rails.
WokGard 15 – Better grip ergonomics and aesthetics, less frame flex
WokButt – Better ergonomics, adjustable buttpad
TTTA – Better ergonomics, cheek weld, quick fill, pressure gauge, no need to remove tank from gun to refill
Tuned valve – huge room for improvement from the factory for better consistency from shot to shot, more efficiency & power, and quieter than stock. If you aren’t shooting one of Tony’s tuned valves, you are doing your gun and yourself a huge disservice. My stock valve was noisy and inconsistent from shot to shot. Tony’s polished, power & o-ring modded valve is unbelievable.
Breech – Hammer slap mod, better o-rings. Quieter, tighter seal between breech and barrel.
Marmot_Militia Frame to Sling Stud Bipod Adapter – The AF bipod sucks, and there is no good option from the factory for using a “real bipod”.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
NO SAFETY!!!!