How to recognize Talon tank and micro tank?
Hi guys!
I just got my Talon tank for my Condor from PA.
Well there is something I would like to check.
Obviously the valve output hole will be smaller than hi-flo Condor tank, but I have never seen Talon tank and micro tank. With PA often making mistakes I would like to know if I got the tank with right valve-talon tank valve. So what is the ID of output hole for Talon valve?
It looks pretty small and I hope I didn’t get micro tank.
Thank you
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
Micro tank should have a smaller hole in the top of the tophat… Normal Talon tank hole is about 3/16″ in diameter…
No problemo Sam!
I will test the velocities as soon as my chrony will arrive.
Please be sure to post your results. Thank you.
Thank you
I will test the velocities as soon as my chrony will arrive.
The same, I have a micro tank it shoots like 600fps, also looks like someone scratched a M in the collar of the tank.
Thank you Michael!
Does Talon valve and micro valve externally look alike or the hole is bigger in Talon valve?
A micro tank should be considerably quieter then your condor tank, I would say you have a talon tank.
Just shot it.
I don’t know how quiet ir loud should it be?
It was almost the same as my hi-flo Condor tank.
Shoot it and see, quiet or loud
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
Not mine!