All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
I would be happy with low 7’s using 14.3 CP’s 8)
I have two of them already moded, but I’m thinking in building an HPA monster 😈 Don’t know if I can though ❓
I leave HPA building to the experts and on this forum that would be Voltar. I am more then happy to let someone else build and test HPA guns. I know a lot of things but I also know what I do not know 😛
Same idea I have 😈
Still thinking on how to do the valve for it ❓
I am thinking about building a mini hpa monster 😆
Adam: What have you done to them? Have you ever tried to modify the tube for it to be able to hold 3000 psi? (build a new tube)
I have two of them already moded, but I’m thinking in building an HPA monster 😈 Don’t know if I can though ❓
Let me know if you need any help. I have done a few 😛
Thanks!I figured it was simple.I am modding my sons 22XX or trying too at least 😆
Sherrod,
They are held in by a set screw and a seal. You need to remove the breech and then unscrew the set screw on the breech holding the barrel in.
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
Too much variation in the metal on Crosman tubes to be safe at such a high pressure. If you want to build a PCP 22xx, then Walter is the man to ask for advice…. but I can almost guarantee that his advice will be to leave it be unless you have a great understanding of HPA applications……and edited the remainder after reading more carefully! 😳
Would be nice if Adam did start making PCP tubes for Crosmans…. 😯