HW100 Tactical Bullpup
So a new project, I liked the tactical Lelya so much I decided to carry the concept on.
I have tried to get a Cricket in England but I am struggling, not only that I think we may run into problems as external power adjusters that are capable of taking the gun above 12ft/lb are possibly illegal, so what to do……..
Simple make my own Cricket alternative 😯
So I have a HW100 carbine in an awful cricket bat style stock, the perfect candidate, I dont like to modify actions too much in case I need to revert to the original gun, in this instance I just need to drill the cylinder/barrel support ring and cut off the trigger guard, to put back would cost about £40.
Just drawn up the concept using the same components I used on the Lelya project and it all fits sweet 😎 😎 😎
So here is the concept sketch, just need to make a reflex moderator once the stock is done – I will post as I go 😀
https://picasaweb.google.com/lh/photo/Sq4FYhJCP5UV22QQDNezZG7eIwRQf-1XJd8GZQBSWx0?feat=directlink
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
When you expire, you may well wake up in an oil bath, being spun at 1200 rpm on a hot metal lathe, and find a threading tool installing a 1/8″ BSPP thread up your arse!!!
You are so intent to dabble in the occult milling arts, conjuring up your metal miracles, all the while cuckolding those less gifted with the products of your evil mind, that you fail to realize the piper will eventually be paid…OH YES, the piper will be paid!!!
You have been warned!
Kindly ‘Ol Uncle H 😯 😯 t
Sometimes I wax philosophic, other times I simply wax my truck.
H 😀 😀 😀 😀 😀 T
you are a wordwise superstar 😀 😀 😀
have to say though, I am having my suspicions about your nationality – BRITISH STANDARD PIPE…… ❓
one minor correction if i can you would struggle to start a parallel thread up my arse, taper would certainly be needed, although I do have a friend up which you could easily cut a 3″ BSPP thread – without lube or even a chamfer 😯
The major and minor gods of milling and machinery don’t take kindly to their minions abusing their talents!
When you expire, you may well wake up in an oil bath, being spun at 1200 rpm on a hot metal lathe, and find a threading tool installing a 1/8″ BSPP thread up your arse!!!
You are so intent to dabble in the occult milling arts, conjuring up your metal miracles, all the while cuckolding those less gifted with the products of your evil mind, that you fail to realize the piper will eventually be paid…OH YES, the piper will be paid!!!
You have been warned!
Kindly ‘Ol Uncle H 😯 😯 t
Sometimes I wax philosophic, other times I simply wax my truck.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Hmmmmmmmmm….we all have pasts, which, if we had our druthers, we’d prefer to forget.
Consider, clever cellmate…cannily conjuring consenting carnal consummation, cancelling celibate callings!
Remember always, take care what signs in life you choose to follow, as the bend at the end of your journey may be painfull and penetrating!!!
Furthermore, take care in how you express yourself publically:
Kindest regards….
Kindly Uncle H 😯 😯 t