I knew a workshop beer fridge would end badly….

I have a Daisy 953 that you may have seen earlier. I was having trouble with its accuracy so after playing with the Combro I decided to thoroughly clean the barrel and do the trigger modification from Pilkguns.

I just reinstalled the OS on my computer and havent got around to installing printer drivers yet so I figure I can easily remember some measurements for 3 simple cut’s on 3 parts.

I grabbed a beer and got started. Took it apart, all the bits laying neatly on my workbench. Turned on the Mill, Controller and PC. Got the trigger in my machine vice and positioned the end mill. Set the XYZ axis to use them for measuring the cut and started.

Everything worked great, no problems at all and it looks good !

Took it out, still looks great, went to the gun to check fit and start wondering how the cut is going to help my gun exactly…..

Well it isnt.. because its on the wrong freakin side !! 👿

Here’s the pilkguns picture.