im having some one peace stanless valves made

dont know if this is the place to post this but i have made a costom one peace valve out of 303 stanless. iv made it for my talonss and i took it down to have 5 more made ill be leaving enough on the valve so u can sand off the end and set your own gap or leave it at the .105 (thats the top hat gap u should have when its installed) that they will be made to. or i could set your gap for u but . the only part that would make me nerviouse is if my black durling is higher or lower and i set it for mine and its diffrent when u get it. mines all factory except i put a way better oring one of thse (90 duro in mine the hard white ones for those that dont know). its a direct fit into the talon ss and talon brass insert. the valve is ported way bigger then the factory stem the hoe in the bottom is dubble the size and i hand grind it so when the air come out it should spin, ( dont really know if it dose but hay not spin the air with the rifling to get the pellet going) . i personally love the way it peforms and i hate the stupped twisty top hat . setting change and the flow is crap.but i know once u fine the sweet spot u want your valve to saty there and this one will .ill try posting pics but if your interrested give me your email so i can send pics. dont quite know what to sell them for i was thinking maybe 30 to 35 shipped. any thoughts would be welcome. any questions ill answer