Is this a good bottle
[/im
g][i
mg][/img]
Is this a good bottle, i dont know anything about them .
What is the valve called , so to find an adapter to k valve scuba.
I have the airforce to scuba k valve fill adapter.
All Replies
First off where the heck do you get off assuming my stuff is hot??? Maybe you should come to me and ask before you post comments like that on a public forum. It isnt hot and it isnt brand new it has a mfg date of 9/08. It has never been used but not brand new.
no ass-uming here at all. just a question that should be asked before a purchase like this
The hand tight fitting will work just fine for your af guns. I am using the same fitting. 😉
Mike
Like knife said a piece of crap, just buy the fitting than send it to me. 😀
It is a nice tank. 😀
Dog gave you the right adapter for the K-valve, but personally I’d go ahead and get the hose assembly. With the hose you get the quick disconnect fitting on the end so if you end up buying another type of gun it’s only a few bucks for the adapter rather than buying everything all over again. I’d think it would hold it’s resale better too as it’s useful to more people.
powderburner look here.
http://www.hamcontact.com/airgun/HoseAssembly/
This is the one you want.
Yoke (SCUBA) to Hand Tight Stainless Steel SCBA Fitting. $89
http://www.hamcontact.com/airgun/HoseAssembly/IMG9475crop.JPG
Good luck
Do they not make the fitting that goes on the tank male thread ,then go to a k scuba fitting.
Then all i would need to do is hook up my air force fill adapter.
Thanks everyone.
Cool Thank’s EVERY ONE ,i see the fitting on the hamcontact.com sight , that goes from scba to scuba k fitting for $89.00,,
(( is this the way to go.)))
That way i can fiill from scuba or scba tank because i already have the airforce scba k valve fill adapter.
-_______________-Seems pricy for two peices of metal anyone know of a better place to get this.___________
voltar_1
First off where the heck do you get off assuming my stuff is hot??? Maybe you should come to me and ask before you post comments like that on a public forum. It isnt hot and it isnt brand new it has a mfg date of 9/08. It has never been used but not brand new.
test
got one from him also, awesome tank, good quality,
If it is coming from newbie then it is a good tank…..I got one from him…
g][img][/img]
Is this a good bottle, i dont know anything about them .
What is the valve called , so to find an adapter to k valve scuba.
I have the airforce to scuba k valve fill adapter.
Looks new, is it ‘hot’? you may want to know that before you buy it. That is about a $1,000 tank new.
Good luck and if all free and clear that is one heck of a find 🙂
Powderburner,
I don’t know if you’ve come across this guys site yet but he has all but 1 of the fittings you’ll need to get that connected to your gun tank. I bought my fill tank & fittings from him and he uses all high quality components.
http://www.hamcontact.com/airgun/HoseAssembly/
You’ll need:
1. SCBA Hose assembly.
2. 1/4″ Female BSPP x male quick disconnect fitting
3. http://www.pyramydair.com/s/a/AirForce_1_4_male_BSPP_Adapter_For_AirForce_Guns/105
That looks like a great tank with a lot of life left, if the price is right… 😀
Sell your K-valve adapter to re-coupe a few dollars.
Regards,
I’ll help you out .. send it here and I’ll fill it on my compressor and test it out for you .. for a couple of years 😆
WooHoo! Uuuh, I mean, nope, it’s a piece of crap! 🙄 Better send it to me so I can get rid of it for you! 😉
Mike
- You must be logged in to reply to this topic.
did I miss something? I didn’t see a price, so why assume it may be hot. Or are we just having another Walter moment? 😆
Air Hog will sell you a brand new bottle with the full set up for 700. A far cry from 1000. In fact, my buddy Hank ordered one just yesterday. They were 625 a few months ago! 🙁
I just bought a used bottle in super shape. Looks brand new as well from Tim at Mac one for 250. And it has quite a few years left on it with a fresh hydro. 😉
Mike