It so loud *_*
Why my .22 _24″ shroud 13″ long… and the sound like 18″ without shroud ? it so loud *_*
Did i need make an other one like you 17″ Shroud ?
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
16gr is that call light pellets ? it was full power only, because my is ” Gunpower SSS ” no power set .
Thanks’ all of you
13″ – 7″ out side barrel , only left around 6″.and i has 5 layer of baffels
inside my shroud, but my hammer was 98g, is that make my shroud to loud ?
Even if it was a tube, it would be about as quite as a stock SS.
A sonic crack is just that. A crack. Not a loud boom like an unshrouded bbl. Somthing else is wrong if it sounds like a bbl with no shroul! Are there baffels and chambers in yourshroud, or a simple tube?
Mike
full power? light pellets? maybe sonic crack. is that a TSS or standard talon frame? A 13″ shroud would just barely extend past the barrel on a standard talon frame w/ 24″ bbl. not long enough.
Just a couple things that come to mind.
It should not be that loud with a 13″ shroud.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
inside my shroud, but my hammer was 98g, is that make my shroud to loud ?
7″ past barrel should be plenty. Ensure the first baffle is not touching the muzzle of the barrel; if it is, you are not utilizing the airspace in the frame or the rear half of the shroud.
First baffle (closest to barrel) should be 1/2″ or more away from touching the muzzle.