LBT cast bullet at 85 FPE/830 FPS

Stock spring
tock breeech
95 grain barrel riding hammer cut down from a 126 grain hammer
LBT 20-1 57 grains Moly lube
36 yards, .60 average
PW 10 Top Hat .80
Left group @ 2600 PSI, right group @ 2800 PSI.
No bell curve, I think I still need to go lighter on the hammer. Running 120 PSI per shot.
Regards,
Roachcreek
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.


Yeah that should read 95 grams. The barrel is or was cut with a lead to help in chambering.
I cut off the lead and converted that 24 inch barrel back to a King shooter yesterday, then cut the choke off the 18 inch barrel and put a lead in it for the 57 grainers.
I started off testing it with the stock spring and 2800 PWSI fill. It is going a bit too slow I think for best accuracy with the 57 grainers, but putting the lead in the 18 incher and removing the choke sure made the 43 grain EJ’s shoot good.
It just made so much more sence to me to have the powerhouse in the little light Talondor.
Regards,
Roachcreek